Guiyang Oukade Industrial Automation Technology Co., Ltd.

The tunnel excavation hydraulic blasting water bag sealing machine is a new type of tunnel excavation hydraulic blasting water bag filling special equipment carefully researched, designed and developed by the scientific researchers of Guiyang Oukade Industrial Automation Technology Co., Ltd. using advanced production technology and combined with domestic actual conditions. The Okade hydraulic blasting water bag sealing machine plays an important role in the hydraulic blasting construction of railway tunnels (Baolan Passenger Line, West-Chengdu Passenger Line, Chengdu-Lanzhou Railway, Yunnan-Guizhou Railway, etc.) and is exported to Germany, Russia, Greece, Ukraine and other countries and regions. .
The water bag is processed by an automatic water bag sealing machine. This sealing machine specially developed for hydraulic blasting has a simple structure and is easy to operate. It can produce about one water bag per hour.
The specific operation is to first connect the water pipe and lock it with a tie ring to prevent air intake. Turn on the power and adjust the temperature to about d. Preheat for about ten minutes and test run. Remove the gas from the water outlet. Then put the plastic bag on the water outlet and press the button. It can be poured into a bag and then automatically sealed into a water bag.
Technical parameters
Production speed only/hour
Measuring range
Power supply Hz
Power
The hydraulic blasting water bag has uniform specifications, uniform texture, automatic water filling and sealing, etc. Features: Improved environmental protection and the health of workers. Reduces odors such as dust and explosives. The production speed is fast, reducing the number of laborers and improving work efficiency. Making water bags is convenient and simple to operate.
The raw materials of water bags are water and plastic bags. The plastic bag is a commonly used polyethylene plastic water bag. The length, diameter, and thickness of the bag are approximately. The water bag is a long product that can be purchased and used directly.
Making water bags for hydraulic blasting
Make quantitative adjustments before starting the machine. Open the back door of the machine, loosen the end nut of the pump connecting rod, adjust the shifting butterfly nut, and then adjust the left and right positions of the pump connecting rod slider to obtain the desired result. Filling capacity required. Clockwise it decreases and vice versa it increases. After adjustment, tighten the end nut to prevent loosening and shifting, affecting the filling capacity and damaging the adjustment rod. After the sealing machine has been quantitatively adjusted, turn on the power and the indicator light turns on. Adjust the temperature control regulator to the appropriate sealing temperature. When the green light changes from the green light to the red light, the adjusted sealing temperature is reached (the initial temperature should be set to d and then gradually adjusted to increase). Before starting the filling and sealing process, unplug the main switch and wait for the machine to run twice to fill the metering pump with water and discharge the air. Then unplug the main switch and manually clamp the plastic bag with the thumb and index finger of both hands and put it on the outlet of the water outlet. Press the start switch. That is to complete automatic filling and sealing.